Used Machinery / 03 Blister Packer / Uhlmann B 1240 reloaded
Uhlmann B 1240 reloaded Blister machine
Pos.-No.: 03-0123
Pos.-No.: 03-0123

Uhlmann B 1240 reloaded
Blister machine

Make: Uhlmann
Type: B 1240 reloaded
Model: Rebuilt 2024

• Format range 100 x 153 mm
• Output max 240 Blister/min (depending on product and format)
• Drawing depth max. 12 mm (max. 24 mm after conversion)
• Punching station output max. 60 cycles/min.
• Pre-draw max. 125 mm
• Plate sealing
• Forming film rigid PVC, PVC/PVDC (Alu forming optional)
• Film width max. 170 mm
• Film thickness 0.1-0.35 mm
• Sealing film aluminum
• Perforating station
• Batch embossing
• Forming with air pressure
• Blister transfer with bad ejection
• Without format parts
• Connection 380V/50Hz

This blister machine has been mechanically overhauled in our specialist workshop. The entire electrical/pneumatic system has been renewed. The machine control system was equipped with the latest control technology.

The following parts were replaced:
• PLC B+R X20 with Automation Panel 12.1" WXGA TFT, system unit PPC3100
• Servo drives, manufacturer B+R
• 1 x film advance after forming and sealing by means of linear servo
• Electrical installation, wiring
• Pneumatics
• Machine guarding
• Various mechanical parts

Optionally available at extra cost:
• Optical blister inspection
• Brush feeder
• Deticated feeder e.g. Uhlmann SimTab / HMH Systems Sypro
• Aluminum forming station
• Further film transport after forming
• Printmark control via film stretching station
• Change Parts

The images shown are sample images, the machine is currently under construction.

<< back